Note : Please click on the dots shown on the machine's parts and check respective part's details below in the description.
The electronic control ensures continuous adaptation of the motor output to the load during drilling. The advantages are high performance at low speed and a steady sequence. If load peaks should be too high, the electronic torque control will be activated in order to prevent tool breakage and avoidable damage. An active contribution to employee safety with BDS machines.
The machines of the Profi-PLUS class are provided with a new visual wear control for the carbon brushes. By replacing the worn carbon brushes in time, you will protect the motor of your machine from damage.
The BDS ProfiPLUS class magnetic drilling machines are equipped with Speed & Torque control potentiometer to help you get the exact RPM and also the required torque while drilling, tapping, racing or countersinking.
BDS offers a wide range of highly efficient magnetic core drilling machines with powerful and durable motors. The spectrum ranges from 800 W to 2,300 W. They are designed for the high performance requirements of the magnetic core drill technology. BDS manufactures machines with multi-stage gearboxes, which are completely embedded in oil. BDS magnetic core drilling machines are robust and reliable.
Cutting oil where it is required. This principle always ensures the exact amount and even distribution over the entire cutting area. No dry running and overheating of the drill, no excessive use of coolant. Tool service life and work results will be significantly improved.
The Swivel Base is an adjustment device on BDS magnetic core drilling machines. To use it: Bring the machine roughly into position, activate the magnet, disable the Swivel Base locking mechanism and now adjust the machine exactly. A relief, especially for overhead or horizontal work.
All BDS Magnetic core drill machine run on single phase power supply and are still more powerful than any conventional drilling machine which run on 3 phase power supply.
The BDS Magnetic core drilling machine of professional range are equipped with integrated cooling tank which provides continuous lubrication while drilling. The tank is integrated in the body of the machine so designed that it looks as one unit.
BDS Magnetic Core Drilling Machines are safe to handle. Due to internal cabling, cables are protected against tearing-off.
The large switches for motor and magnetic power are separated and safe to handle, i.e., confusion is impossible and accidents are prevented. Thanks to the construction of the switch, unintended actuation of the motor switch is prevented.
The load configuration and the reserves of the electromagnet are exactly adapted for the performance of the respective magnetic core drilling machine. The user is informed by a visual control. LED green: The magnetic adhesion meets the minimum requirements. LED red: The magnetic adhesion is not sufficient, because it is reduced due to low material thickness or a coat of lacquer, forge scale or zinc.
KEYLESS QUICK-CHANGE DRILL CHUCK
The reversible motor is an essential feature for thread cutting or tapping. Reversible motor makes it easy to remove the taps without damaging the threads. The left hand tap is also possible with the reversible motor.